Just In Case

At home or on the go, this discreet vibrator set takes you to unexplored heights with 7 thrilling functions, then lets you enjoy the rest of life’s pleasures. The included case not only recharges the bullet vibrator, it also sanitizes so you’re ready to play again anytime. You never know where your amorous adventures might take you so slip this set into your bag, just in case.

FEATURES

· UV sanitize and recharge your toy at the same time

· Case lights up inside when it sanitizes while the indicator lights on the outside of the case show charging progress

· Case holds two full charges—wirelessly recharge your vibrator on the go

· Smooth, ABS bullet with 1 vibrating speed and 6 pulsing patterns

· Bath-friendly toy, do not allow case to come into contact with water

· Run time: 40 minutes/hours (high) to 50 minutes/hours (low), charge time: 2 hours

· Case: length: 4.5 in./11 cm, width: 2.25 in./5.5 cm

· Bullet: length: 3.5 in./9 cm, width: 1.25 in./3 cm

Contents:

· Just In Case Vibrator and Case Set

· USB Charger Cord

DIRECTIONS

This product arrives partially charged. Before use, charge completely.

Charging the Vibrator: Place vibrator into the case and close the case lid. Lights will illuminate and flash while product is charging. Number of lights illuminated reflects current battery power level. When product is fully charged, lights will stop flashing and remain illuminated. Your case holds two full charges for your vibrator for convenient, wireless charging on the go.

Charging the Case: Use USB power cord provided and insert charging pin into the opening on the back of the case, then plug the other end into a USB port. Close case lid. Lights will illuminate and flash while product is charging. Number of lights illuminated reflects current battery power level. When case is fully charged, lights will stop flashing and remain illuminated.

UV Sanitizer Information: The case can also be used to sanitize the vibrator. Before UV sanitizing, wash toy with clean water and Cleansing Mist. Spray Cleansing Mist on the toy, rinse under running water, wipe clean, and pat dry as needed. Toy must be completely dry before inserting into case. For UV sanitization, insert vibrator into case and gently twist until the case cavity light illuminates and remains solid. Solid light within the case cavity indicates the UV sanitizer has activated. If the light is flashing, the vibrator is not aligned inside the case. Close the case lid and wait 20 minutes to complete a sanitization cycle. Do not open the case before the cycle is complete as this will interrupt sanitization. If the case is accidentally opened before the cycle is complete, close the case lid to restart the cycle.

Using the Vibrator: To turn on, hold button for 3 seconds. To cycle through vibrating speeds and pulsing patterns, push button. To turn off, hold button for 3 seconds.

Wash before and after each use. For best results, use Cleansing Mist.